Table of Contents
Advertisement
using the DVR
SETTING THE DEVICE
You can setup Camera, Storage Device, Remote Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control.
2. Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
3. Use the up/down buttons (▲▼) to move to <Camera>,
and press [ENTER] button.
4. Select <Camera>.
You will see a window where you can configure the
camera settings including Video, Audio, CH Name,
SEQ-Dwell Time.
5. Use direction buttons (▲▼◄ ►) to move to a desired
item, and set the value.
• Video
- <ON/OFF> : You can turn ON/OFF the selected
channel's camera.
- <Covert1> : Shows information other than the video of the selected channel.
For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.
• Audio
- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel's audio is off on the Live screen and not recorded.
38_ using the DVR
Device
Camera
Storage Device
Remote Device
Monitor
Camera
Camera
PTZ
C H
V i d e o
A u d i o
C H N a m e
1
O N
O F F
C A M 0 1
2
O N
O F F
C A M 0 2
3
O N
O F F
C A M 0 3
4
O N
O F F
C A M 0 4
S c r e e n S e t u p
P r i v a c y R e g i o n
O K
C a n c e l
L o g o u t
R e t u r n
S E Q - D w e l l T i m e
5 s e c
5 s e c
5 s e c
5 s e c
Hide quick links:
Advertisement
Table of Contents
