Enabling The Trusted Platform Module - HP ProLiant DL580 User Manual

Install the TPM board. Press down on the connector to seat the board.
6.
Install the TPM security rivet by pressing the rivet firmly into the system board.
7.
Install the SPI board (on page 31).
8.
Install the access panel.
9.
Slide the server back into the rack.
10.
Power up the server (on page 25).
11.

Enabling the Trusted Platform Module

During the server startup sequence, press the F9 key to access System Utilities.
1.
From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) >
2.
Server Security.
Select Trusted Platform Module Options and press the Enter key.
3.
Select Enabled to enable the TPM and BIOS secure startup. The TPM is fully functional in this mode.
4.
Press the F10 key to save your selection.
5.
Hardware options installation 86