Turn Signal/Lane Change/High-Low Beam/Hazards Lever - Thor Motor Coach 2009 Mandalay Owner's Manual

DASH CONTROLS & INSTRUMENT PANELS

Turn Signal/Lane Change/High-Low Beam/Hazards Lever

The lever on the left side of the steering column controls the turn signal with lane change
feature, as well as the Headlamp high/low beam toggle and the Hazard Lights.
The turn signal lever has two off-center positions, one positions upward (for right) and one
downward (for left). To signal a turn, move the lever all the way up or down. These are
latching positions. The lever will stay in one of these positions until the steering wheel returns
back to center (off) as the turn is completed.
To signal a lane change, raise or lower the lever to the latching position. After completing the
lane change, manually pull or push the lever back to center.
To change the headlamps from low to high beams, pull the same lever used for turn signal
operation up toward the driver and release the lever. This is a self-returning action. Repeating
this toggle action will return to the low beams.
To engage the hazard lights, pull the red hazard switch out away from the steering column.
This will activate the hazard light flash sequence. To disengage the sequence, raise or lower
the turn signal lever to a latching position, then manually return the lever back to center (as if
signaling a lane change).
MANDALAY
5-12