Table of Contents
Advertisement
CARE & MAINTENANCE
Clean and wax all extrusions when waxing the motorhome sidewalls to help avoid surface
pitting. Special aluminum cleaners are available to restore the original luster. Make sure to
follow the instructions for use as outlined on the product package. Chrome surfaces can be
restored with special chrome polish if regular cleaning methods are not successful. Again, be
sure to follow product instructions for use.
Using soap, water, and a medium bristle brush will keep the sidewall clean and the whitewall
looking bright.
To keep the rims of the motorhome looking their best, follow these simple steps:
1. Rinse the wheel with high-pressure water to remove any debris, grit or dirt particles.
2. Use a 100% cotton cloth dipped in a mild soap solution to help remove stuck on dirt
and grease.
3. Rinse the remaining soap residue from the wheel.
4. Dry the wheel thoroughly with a 100% cotton cloth.
NOTE: For more information regarding the care and maintenance of the motorhome rims
contact Accuride Corporation at 800-869-2275.
Prior to raising the antenna, visually inspect for any obstructions or overhead electrical
wires. Damage to the antenna, severe shock, personal injury or death can occur from
inadequate clearance.
Do not move the motorhome with the antenna in a raised or partially raised position.
Damage to the antenna, the worm gear, or the motorhome roof may result.
To lubricate the elevating gear, apply a liberal amount of silicone spray lubricant to the
elevating gear with the lift in the down position. Run the lift up and down a few times to
distribute the lubricant over the gears.
If rotating the antenna becomes difficult, normal operation can be restored by lubricating the
bearing surface between the rotating gear housing and the base plate. Any spray type
silicone lubricant may be used.
12-4
EXTRUSIONS & ALUMINUM SURFACES
TIRES & RIMS
TV ANTENNA
MANDALAY
Advertisement
Table of Contents
