Fixture Installation - Elation OPTI TRI WHITE II User Manual

F I X T U R E I N S T A L L A T I O N
C A U T I O N S
For added protection, mount the fixture in areas outside walking paths, seating
areas, or in areas were unauthorized personnel might reach the fixture.
Max ambient operating temperature for this fixture is 113°F. (45°C)
Do not use the fixture under or above this temperature.
Before mounting the fixture to any surface, make sure the installation area can
hold a minimum point load of 10 times the weight of the fixture.
Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable.
Never stand directly below the device when mounting, removing or servicing.
POWER LINKING
Max number of units that can be power linked is 5 units @110V and 10 units @230V.
CLAMP MOUNTING
The OPTI TRI WHITE II
mounting this fixture to truss be sure to secure an appropriately rated clamp using
an M10 screw fitted through the center hole of the Dual Yoke / Floor Stand.
SECURING
Regardless of the rigging option you choose for your OPTI TRI WHITE II
sure to secure your fixture with a safety cable. The fixture provides a built-in rigging
point for a safety cable on the hanging bracket as illustrated on the previous page.
Be sure to only use the designated rigging point for the safety cable.
F L A M M A B L E M A T E R I A L W A R N I N G
Keep fixture at least 5.0 ft (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
E L E C T R I C A L C O N N E C T I O N S
A q u a l i f i e d e l e c t r i c i a n s h o u l d b e u s e d f o r a l l
e l e c t r i c a l c o n n e c t i o n s a n d / o r i n s t a l l a t i o n s .
™ provides a unique integrated Dual Yoke / Floor Stand. When
w w w . e l a t i o n l i g h t i n g . c o m
10
OPTI TRI WHITE II™ User Manual Ver. 1
™ always be