NETGEAR Nighthawk D7000 User Manual page 82

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Field
Use VLANID
Priority (0 ~ 7)
Bridge Mode
Encapsulation
Login
Password
Service Name
Connection Mode
Description
Select the Use VLANID check box and enter the VLAN ID, as
indicated by your ISP.
A VLAN ID might be required if you subscribe to both Internet service
and IPTV service. If your ISP did not provide you with a VLAN ID,
leave the Use VLANID check box cleared, which is the default setting.
If your ISP provided you with a VLAN ID and a priority value, enter
the priority value, which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID.
If your ISP did not provide you with a priority value, leave the default
setting (0).
This setting is an option that applies to the IPTV interface only.
For information about configuring bridge mode, see
Mode for IPTV Devices
For a PPP over Ethernet (PPPoE) connection, select PPPoE (PPP
over Ethernet) from the menu.
Note PPP over ATM (PPPoA) is not supported for a cable
or fiber connection.
Enter the login name that you use to log in to your Internet service,
as indicated by your ISP.
This login name is often an email address.
Enter the password that you use to log in to your Internet service,
as indicated by your ISP.
Enter the service name that you use to log in to your Internet service,
as indicated by your ISP.
Often, a service name is not required.
Select how the Internet connection functions:
Manage the Internet Settings Manually
82
on page 215.
Enable Bridge