NETGEAR Nighthawk D7000 User Manual page 214

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
The previous figure shows only the top of the Internet Setup page.
8. Configure a VLAN for the virtual IPTV interface:
a. Make sure that the Enable This Interface check box is selected for the virtual IPTV interface.
If you already enabled and configured the virtual IPTV interface, the check box is selected.
b. Select the Use VLANID check box.
c. Enter a VLAN ID that applies to the virtual IPTV interface.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
d. To specify a priority for the VLAN, in the Priority (0 ~ 7) field, enter a value from 0 to 7.
e. Click the Apply button.
Your settings are saved for the virtual IPTV interface.
Note For information about enabling bridge mode for the IPTV virtual interface, see
Bridge Mode for IPTV Devices on page 215.
Manage the WAN and LAN Network Settings
214
Enable