NETGEAR Nighthawk D7000 User Manual page 69

Ac1900 wifi vdsl/adsl modem router
Hide thumbs Also See for Nighthawk D7000:
Table of Contents

Advertisement

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
The BASIC Home page displays.
5.
Select Internet.
The Internet Setup page displays.
6.
From the Select Country menu, select the country in which you use the modem router.
The Select Country menu is not available in all countries and might be masked out.
7.
From the Select Internet Service Provider menu, select the Internet service provider (ISP) that you
are using.
If your ISP is not in the menu, select Other.
8.
Select the virtual interface:
Internet interface. From the menu above the Enable This Interface check box, leave the default
menu selection at Internet.
• IPTV interface. From the menu above the Enable This Interface check box, select IPTV.
9.
From the Transfer Mode menu, select VDSL(PTM).
When you select VDSL(PTM) from the Transfer Mode menu, the only option in the DSL Mode menu
is VDSL2.
10.
Specify that your ISP requires you to log in:
If you are configuring the Internet interface, scroll down to the Does your Internet connection require
a login? section and select the Yes radio button.
If you are configuring the IPTV interface, scroll down to the Does your IPTV connection require a
login? section and select the Yes radio button.
11.
Make sure that the Enable This Interface check box is selected.
As an example, the following figure shows the settings that display when you configure a VDSL
connection for the Internet interface.
Manage the Internet Settings Manually
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents