NETGEAR Nighthawk D7000 User Manual page 16

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Figure 3. Modem router back panel
In addition to the three antennas, viewed from left to right, the back panel contains the following
components:
• LED Off/On switch. Move the LED Off/On switch to to the Off position to turn off all LEDs, except
for the Power LED.
• Reset button. For information about using the Reset button, see
Factory Default Settings
• Power On/Off button. Press the Power On/Off button to provide power to the modem router.
• DC power connector. Connect the power adapter that came in the product package to the DC power
connector.
• Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the modem router to a fiber or cable
modem. This port is colored red.
Note You can use either the Internet port or the DSL port for WAN connectivity.
on page 238.
Hardware Overview of the Modem Router
16
Return the Modem Router to Its