Change The Physical Wan Connection Preference - NETGEAR Nighthawk D7000 User Manual

Manage the WAN and LAN Network Settings
This chapter describes how you can manage the WAN and LAN network settings of the modem router.
The chapter includes the following sections:
•

Change the Physical WAN Connection Preference

• Enable and Configure a VLAN
• Enable Bridge Mode for IPTV Devices
• Manage the WAN Security Settings
• Set Up a Default DMZ Server
• Manage NAT Filtering
• Manage the SIP Application-Level Gateway
• Manage the Modem Router's LAN IP Address Settings
• Manage the Router Information Protocol Settings
• Manage Reserved LAN IP Addresses
• Change the Modem Router's Device Name
• Manage the DHCP Server Address Pool
• Disable the Built-In DHCP Server
• Set Up and Manage Custom Static Routes
on page 212
on page 215
on page 216
on page 217
on page 218
on page 222
on page 225
on page 225
on page 227
on page 228
on page 210
on page 219
on page 219
on page 221
210
10