NETGEAR Nighthawk D7000 User Manual page 243

Ac1900 wifi vdsl/adsl modem router
Hide thumbs Also See for Nighthawk D7000:
Table of Contents

Advertisement

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
The information onscreen uses the following color coding:
A green flag
indicates that the cable connection or Internet connection is fine and no problems
exist. For a WiFi network, the network is enabled and secured.
A red X
indicates that configuration problems exist for the cable connection or Internet connection
or the connection is down. For a WiFi network, the network is disabled or down.
An amber exclamation mark
get an Internet connection (for example, because the cable is disconnected), that a WiFi network
is enabled but unprotected, or that another situation that requires your attention occurred.
The following table describes the fields of the six panes on the ADVANCED Home page.
Field
Router Information
Hardware Version
Firmware Version
GUI Language Version
LAN Port
The settings of the LAN port. For information about how to configure the LAN settings, see
the Modem Router's LAN IP Address Settings
page 227.
MAC Address
IP Address
DHCP
Internet Port
The settings of Internet port. The Internet connection can run through the ADSL port with DSL service
or through the WAN Ethernet port with cable or fiber service. For information about how to configure
the Internet settings, see one of the following sections:
Manage the Modem Router and Monitor the Traffic
indicates that the cable port or Internet port is configured but cannot
Description
The modem router model.
The version of the modem router firmware. If you upgrade the
firmware on the modem router, the version changes.
The version of the modem router firmware. If you upgrade the
firmware on modem router, the version changes.
on page 219 and
The Media Access Control (MAC) address. This address is the
unique physical address that is assigned to the Ethernet LAN
port.
The IP address that the Ethernet LAN port uses. The default
IP address is 192.168.0.1.
Displays whether the DHCP server of the modem router is
enabled for devices that are attached to the LAN.
243
Disable the Built-In DHCP Server
Manage
on

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents