Table of Contents
Advertisement
NONCOMBUSTIBLE REQUIREMENTS
NOTE: Use this illustration as a guide when attaching the noncombustible boards to the structural framing. Use the #8
x 3/4" self-tapping screws provided.
2" (51 mm)
from edge
1 1/2" (38 mm)
from edge
Figure 9
If a mantel will be installed and the attachment points fall upon the noncombustible surface above the glass frame opening,
a suitable structure must be added in order to support the weight of the mantel. A framework of metal studs as shown in
Figure 10 is suggested. The two (2) front stand-offs on top of the unit will need to be removed.
Maintain 16
⁄
"
1
2
(419 mm) to
Combustible Framing
Figure 10
20306745
9"
9" (229 mm)
Spacing
Metal Framing
VWDV70 Series Gas Fireplace
#8 x 3/4" Self-tapping
Screws (supplied)
FP2941
11
- Quick Links:
- Replacement Parts
Hide quick links:
Advertisement
Table of Contents
