Your Programmer; Setting The Clock - Danfoss SET3M Installation & User's Instructions

User Instructions

Your programmer

The SET3M programmer allows you to switch your hot
water and heating on and off at times that suit you.
Four tappets on the timing dial let you decide when you
want your hot water and heating to come on and go off
each day. The programmer provides 2 ON times and 2
OFF times per day. Using two simple rocker switches you
can control your heating and hot water separately, to suit
your lifestyle.

Setting the Clock

Remove the dial cover
Turn the dial clockwise until
the correct time is lined up
with the TIME setting line
Day segment, covering
6.00am-6.00pm, has an
aluminium fi nish
Night segment, covering
6.00pm-6.00am, is
coloured black
16
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytub.co.uk
!
IMPORTANT:
If you have a powercut you will have
to reset the time - and also when the
clocks change in Spring and Autumn
TIME
setting
line
Day
segment
Night
segment