Warning / Error Indications; Error Indication Method - Epson Stylus Photo R280 Service Manual

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50

3.2 Warning / Error Indications

This section describes how the printer indicates an error/warning status with LEDs, or
on the screen of the printer driver when a problem arises during various operations;
power-on sequence, paper feeding, ink drawing, printing, and so on.

3.2.1 Error Indication Method

The Epson Stylus Photo R280/R285/R290 and Epson Artisan 50/Epson Stylus Photo
T50/T59/T60/P50 are equipped with LEDs. You can check most of the troubles with
the status of the LEDs or messages shown on the windows of "EPSON Status Monitor
3". (See 1.5.3 "Operation Buttons & LEDs
LEDs Status
LED Status
-- No change
Light Lights up normally
Flash Flashes at intervals of 1.25 seconds.
Flash 2 Flashes as follows; ON (0.5 sec.) - OFF (0.5 sec.) - ON (0.5 sec.) - OFF (1.0 sec.)
Flashes at high
Flashes at intervals of 0.5 seconds.
speed
Flashes
Same as Flash
Alternatively 1
Flashes
Flashes at intervals of 1.25 seconds.
Alternatively 2
Chapter 3 Troubleshooting
Functions"(p.19))
Meaning
3.2 Warning / Error Indications
Message box on the window of "EPSON Status Monitor 3"
Figure 3-2. Error Indication on EPSON Status Monitor 3
NOTE: The part number of the Ink Cartridges shown in the Status Monitor 3
screen differs by destination.
Revision C
Error Message
Descriptions
of the error
Ink Level
31
Confidential