Epson Stylus Photo R280 Service Manual page 63

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50
2. Slide the Front Housing in the direction of the arrow and remove the Front
Housing from the Upper Housing.
Grooves
Front Housing
Figure 4-15. Removing the Front Housing
When installing the Upper Housing, be careful of the following:
Do not pinch the cables.
Tighten the screws in the order given in
Match the ribs of the Upper Housing shown in
with the grooves of the Lower Housing.
As shown in Fig.4-16, match the A part of the Front Housing
with the screw box of the Lower Housing.
Front Housing
Screw box of
Lower Housing
Figure 4-16. Installing Upper Housing
Chapter 4 Disassembly/Assembly
[Rear Side]
Ribs
Fig.4-14 (p.62).
Fig.4-14 (p.62)
A part of Front
Housing
4.2.4 Upper Housing (Removing Exterior Parts/Components)
Revision C
63
Confidential