"∞"
"Ω×1"
Br R
OFF
ON
Br
R
CHECKING SWITCHES
YP-N
CHECKING SWITCHES
"0"
CHECKING STEPS
Using pocket tester, check switches for conti-
nuity between their terminals to determine
whether they are correctly connected.
Replace the switch component if any of the
combinations does not produce the correct
reading.
Pocket tester:
NOTE:
8 Turn the switch to the "ON", "OFF" positions
several times.
8 Adjust the pocket tester to correct "0" posi-
tion before checking switches.
8 Set the pocket tester selector to "×1"Ω.
SWITCH CONNECTION AS SHOWN IN THIS
MANUAL
This manual contains connection charts, like
the one shown on the left, showing the termi-
nal connections of switches (e.g. the main
switch, handlebar switch, brake switch, light-
ing switch etc.)
The column on the extreme left indicates the
different switch positions, the top line indicates
the colors of the leads connected to the termi-
nals on the switch.
"?—?" indicates terminals between which
there is continuity, i.e. a closed circuit, in the
given switch position.
In this chart:
"Br and R" have continuity with the switch in
the "ON" position.
7-4
ELEC
YU-03112
–
+