Yamaha YW50AP Service Manual page 157

New
2
2. Install:
3. Install:
4. Tighten:
LT
NOTE:
Tighten the damper rod bolt 1 while holding the
damper rod with a T-handle 2 and holder 3.
1
3
5. Install:
New
NOTE:
8 Before installing the oil seal 1, apply lithium
8 Adjust the retaining clip so that it fits into the
cC
Make sure that the oil seal numbered side faces
upward.
6-38
FRONT FORK
8 Inner tube 1
Into outer tube 2.
8 Plain washer 1
8 Bolt (damper rod) 2
8 Bolt (damper rod) 1
T-handle
YM-01326-A
Holder
YM-01300-1
8 Oil seal 1
New
8 Retaining clip
Use the fork seal driver weight 2 and
the attachment 3.
soap base grease onto the oil seal lips.
outer tube groove.
Fork seal driver weight:
YM-33963
Attachment:
YM-01400
CHAS
New
23Nm(2.3 m.kg, 16.6ft.lb)