Drive Cable Options - HP ProLiant DL160 Gen9 User Manual

Connect the 24-pin power supply cable to the system board.
d.
Ensure that the battery cable is underneath the DIMM guard.
e.
Install the access panel (on page 22).
10.
Install the server into the rack
11.
Power up the server (on page 17).
12.

Drive cable options

Use these drive cable options to install an HP Host Bus Adapter or an HP Smart Array Controller board
option.
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
("Installing the server into the rack" on page 30).
Hardware options installation 46