Timer Mode; Quiet Mode - Hisense Essense User Manual

Operation instructions

Timer mode

It is convenient to set the timer on with TIMER ON/OFF buttons when you go out in the morning to achieve a
comfortable room temperature at the time you get home. You can also set timer off at night to enjoy a good
sleep.
How to set TIMER ON?
1. Press button.
TIMER ON
Result : "ON 12:00" flashes on the LCD.
2.
Press the or
TEMP.
Result : Once to increase or decrease the time setting by 1 minute.
One and a half seconds to increase or decrease the time setting
by 10 minute.
For a longer time to increase or decrease the time by 1 hour.
3. When your desired time displayed on LCD, press the TIMER ON button and confirm it.
Result :
A "beep" can be heard.
"ON" stops flashing.
The TIMER indicator on the indoor unit lights up.
4. After the set timer displayed for 5 seconds the clock will be displayed on the LCD of the remote controller
instead of set timer.
How to cancel TIMER ON?
TIMER ON
Press the button again.
Result : A "beep" can be heard and the indicator disappears,
the time on mode has been canceled.
Note: It is similar to set TIMER OFF, you can make the appliance
switch off automatically at your desired time.

QUIET mode

In this mode, the air conditioner will work with low noise performance by low compressor frequency and low
fan speed. This mode is only available for inverter models.
Note: Press MODE.FAN.SMART.SUPER button cancel QUIET mode..
TEMP.
button.
12
ON
PRESS
PRESS
PRESS
PRESS
PRESS