Smart Mode - Hisense Essense User Manual

Operation instructions

SMART mode

How to set SMART mode?
SMART
Press the button.
Result : Enters SMART mode(fuzzy logic operation)
directly regardless of the unit is on or off.
Temperature and fan speed are automatically
set based on theactual room temperature.
Heat pump models
Indoor temperature
21℃ or below
21℃-23℃
23℃-26℃
Over 26℃
Cooling only models
Indoor temperature
23℃ or below
23℃-26℃
Over 26℃
SMART button is ineffective in SUPER mode.
Press MODE button cancel SMATR mode.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, For the on/off, you can choose from -2 to 2, for the inverter you can choose
from -7 to 7. if you still feel uncomfortable.
What you can do in SMART mode?
Your feeling
Uncomfortable because
of unsuitable air flow
volume.
Uncomfortable because
of unsuitable flow
direction.
How to cancel the SMART mode?
MODE
Press the button.
Result : The SMART mode will be canceled.
Operation mode
HEATING
FAN ONLY
DRY
COOLING
Operation mode
FAN ONLY
DRY
COOLING
Button
Indoor fan speed alternates among High, Medium
and Low each time this button is pressed.
FAN SPEED
Press it once, the vertical adjustment louver(horizontal
adjustment louver) swings to change vertical airflow
direction(horizontal airflow direction). Press it again,
swings stops.
10
PRESS
Target temperature
22℃
Room temperature
decrease 2℃ after
operate for 3 minutes
26℃
Target temperature
Room temperature
decrease 2℃ after
operate for 3 minutes
26℃
Adjust
PRESS