Connecting A Computer - Sony SRG-300H Operating Instructions Manual

Connecting a Computer

RS-232 Connections
SRG-300H
VISCA IN
to RS-232 input
Computer
Notes
• When you connect a computer to the
camera using the VISCA cable (RS-232
cross cable), you can control the camera
from a computer instead of the supplied
infrared remote commander.
• In the case of VISCA RS-232 connection,
make sure that the BOTTOM switch is set
to RS-232 (page 10).
• It is not possible to connect both VISCA
RS-232 and VISCA RS-422
simultaneously.
to the AC power
adaptor (supplied)
VISCA cable
(not supplied)
• Do not mix VISCA RS-232 (cross) and
VISCA RS-422 cables. Using these cables
at the same time may result in
malfunction. Cannot be used in the LAN
connection.
To obtain a cable, consult your Sony dealer.
For detailed information on how to connect
the camera and the VISCA command list,
refer to the Technical Manual of the camera.
For details on obtaining a Technical
Manual, consult your Sony dealer.
RS-422 Connections
SRG-300H
VISCA OUT
VISCA RS-422
connector plug
(supplied)
Computer
Notes
• Make up the cable using the supplied
VISCA RS-422 connector plug. See
"Using the VISCA RS-422 connector pin
assignments" (page 47).
• In the case of VISCA RS-422 connection,
make sure that the BOTTOM switch is set
to RS-422 (page 10).
to the AC power
adaptor (supplied)
VISCA
RS-422 cable
RS-422 to RS-232
converter (not
supplied)
to RS-232 input
33
Connections