Sony SRG-300H Operating Instructions Manual page 10

Hd color video camera
Hide thumbs Also See for SRG-300H:
Table of Contents

Advertisement

Setting of the SYSTEM SELECT
switch
This switch allows you to select the video
format of the signal to be output from the
HDMI video connector.
SRG-300H
Set this arrow to the
desired video format.
Switch
Video format
position
0
1920×1080p/59.94
1
No output
2
1920×1080p/29.97
3
1920×1080i/59.94
4
1280×720p/59.94
5
1280×720p/29.97
EDID
6
VISCA CONTROL
7
8
1920×1080p/50
9
No output
A
1920×1080p/25
B
1920×1080i/50
C
1280×720p/50
D
1280×720p/25
E
No output
No output
F
10
Location and Functions of Parts and Controls
Notes
• Be sure to set this switch before you turn
on the power of the camera. You can also
set this switch in the standby mode of the
camera. After completing the setting, turn
on the power of the camera by connecting
it to an AC outlet using the supplied AC
power adaptor and AC power cord, by
using the VISCA command or infrared
remote commander.
• Be sure to use a Phillips-head screwdriver
when changing the switch position. If you
use a tool other than the designated
screwdriver, the crossed groove may be
damaged.
• If the switch position is set to 1, 9, E or F
(no output), the POWER lamp and
STANDBY lamp will both remain lit. In
such cases, control via the infrared remote
commander and VISCA commands is
disabled.
• If the switch is set to 6 (EDID), the most
suitable format will be output
automatically based on the resolution of
the TV monitor to be connected.
• If the switch position is set to 7 (VISCA
CONTROL), you can configure the video
format via external communication.
For detailed information, refer to the
Technical Manual of the camera. For details
on obtaining a Technical Manual, consult
your Sony dealer.
Setting of the BOTTOM switches
59.94 Hz
system
ON
OFF
To change the setting of the BOTTOM
50 Hz
switches, turn off the camera (unless it is in
system
standby mode) first, set the BOTTOM
switches, then turn on the camera again.
Changing the BOTTOM switches is not
possible while the camera is turned on.
OFF: Default position

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents