EX-COMP (exposure compensation)
When MODE is set to one of FULL AUTO,
SHUTTER PRI or IRIS PRI, set this item to
ON to enable exposure compensation.
When you set EX-COMP to ON, LEVEL
appears and you can select the exposure
compensation level from among the
–7, –6, –5, –4, –3, –2, –1, 0, +1, +2, +3, +4,
+5, +6, +7
If you set the level to 0, exposure
compensation will be disabled. Level +7 is
the brightest and –7 is the darkest
When EX-COMP is set to OFF, exposure
compensation does not function.
When you set the mode to ON, the camera
automatically uses slow shutter speed for
exposure as the illumination of the object to
be shot decreases. This mode is only
available when AE mode is set to FULL
The WHITE BALANCE menu is used to
select the white balance mode.
MODE (white balance mode)
Select the white balance mode from among
AUTO, IN DOOR, OUT DOOR, ONE
PUSH, ATW (Auto Tracing White
When you select MANUAL, R.GAIN (red
gain) and B. GAIN (blue gain) appear. You
can select each item in the range from –128
When you select the ONE PUSH
Perform the following operation.
Zoom in on a white subject in the
center of the screen.
Press the HOME button of the
supplied infrared remote commander.
The one-push white balance adjustment
When DISPLAY INFO (page 20) is set to
ON on the SYSTEM menu, the result of the
white balance adjustment is displayed on the
WHITE BALANCE Menu