Operation Using The Supplied Infrared Remote Commander; Before Operating; Turning On The Power - Sony SRG-300H Operating Instructions Manual

Hd color video camera
Hide thumbs Also See for SRG-300H:
Table of Contents

Advertisement

Operation Using the Supplied Infrared Remote Commander

B

Before Operating

Before operating the camera, check that the
camera and peripheral devices are properly
installed and connected.
For details, see "Setting of the SYSTEM
SELECT switch" (page 10), "Installing the
Camera" (page 28) and "Connections"
(page 32).
Note
The supplied infrared remote commander
may not work correctly near the inverter
lighting fixtures. In such a case, try to install
the camera far from the inverted luminaire.
You can check whether or not the installed
location is good for the usage of the infrared
remote commander.
For detailed information on how to check,
refer to the Technical Manual. For details
on obtaining a Technical Manual, consult
your Sony dealer.
22
Before Operating / Turning on the Power
Turning on the
Power
SRG-300H
DC 12 V
POWER lights.
1
Connect the camera to an AC outlet
using the supplied AC power adaptor
and power cord.
The power is turned on and the POWER
lamp lights.
The camera will automatically pan and
tilt and be reset to the position stored in
POSITION 1 (Pan/tilt reset action).
to AC outlet

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents