Infrared Remote Commander; (Supplied) - Sony SRG-300H Operating Instructions Manual

Hd color video camera
Hide thumbs Also See for SRG-300H:
Table of Contents

Advertisement

A VISCA/LAN switch
Select the control setting.
Set to ON to use the LAN connection
and set to OFF to use the VISCA
CONTROL (serial control).
B RS-232/RS-422 select switch
(when using the serial
connection)
Set to RS-422 to operate color video
camera using the VISCA command via
the RS-422 interface.
C BAUD RATE SELECT switch
(when using the serial
connection)
Set the communication speed in the
VISCA CONTROL.
ON: 38,400 bps
OFF: 9,600 bps
D IR OUT switch
Set to ON to enable output of the
receiver signals, which are transmitted
from the infrared remote commander via
the VISCA IN connector (page 47), or
set it to OFF to disable the output.
E Switch 5 (Not used)
Be sure to set this switch to OFF.
F Switch 6 (Not used)
Be sure to set this switch to OFF.
G Switch 7 (Not used)
Be sure to set this switch to OFF.
H Switch 8 (Not used)
Be sure to set this switch to OFF.

Infrared Remote Commander

(supplied)

A CAMERA SELECT buttons
Press the button corresponding to the
camera you want to operate with the
infrared remote commander.
The camera number can be set using the
IR SELECT switch on the rear of the
camera.
Note
If two or more cameras are adjacent and
have the same camera number, they are
operated simultaneously with the same
infrared remote commander. When you
install the cameras close to each other,
set different camera numbers.
For the camera number setting, see
"Operating Multiple Cameras with the
Infrared Remote Commander"
(page 25).
B FOCUS buttons
Used for focus adjustment.
Press the AUTO button to adjust the
focus automatically. To adjust the focus
manually, press the MANUAL button,
and adjust it with the FAR and NEAR
buttons.
Location and Functions of Parts and Controls
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents