Adjustment; Leg Rest Length - Permobil Corpus 3G Owner's Manual

User Manual Corpus 3G

Adjustment

The leg rest cover
Remove the leg rest cover by undoing
the two screws and then pulling the
cover directly forward. See the illustra-
tion. Fit by pushing the cover into place
and then securing it with the two screws.

Leg rest length

The leg rest length can be adjusted con-
tinuously and secured using two locking
screws.
1. Remove the leg rest cover. See
description above.
2. Undo the leg rest's two inner locking
screws. See the illustration.
3. Adjust the leg rest to the required
length and secure by tightening the
locking screws.
4. Check, following adjustment, that
the leg rest is fully secured.
5. Replace the plastic cover. See
description above.
m
WARNING
Do not load the foot plates during adjustment.
The foot plates must never be adjusted so high that the lower section of the leg rest's square
tubing ends up below the underside of the foot plates.
The leg rest cover is attached
using two screws.
The leg rest length adjustment is
secured using the inner locking
28 28
Adjustment
screws.