User Manual Corpus 3G
Foot plate height
The height of the foot plates can be
adjusted individually and steplessly.
They are secured using the two outer
locking screws.
1. Remove the leg rest cover. See the
description on the previous page.
2. Undo the foot plates' locking screws.
See the illustration.
3. Adjust the foot plates to the required
height and secure by tightening the
locking screws.
4. Check, following adjustment, that
the foot plates are fully secured.
5. Replace the plastic cover. See the
description on the previous page
m
WARNING
Do not load the foot plates during adjustment.
The foot plates must never be adjusted so high that the lower section of the leg rest's square
tubing ends up below the underside of the foot plates.
The height of the foot plates is
secured using the outer locking
29
29
Adjustment
screws