User Manual Corpus 3G
Positioning belt
Fitting a positioning belt
There is an accessory rail on each side of the seat frame intended for attaching
a positioning belt, etc. The positioning belt should be fitted in the rail's upper
groove.
1. Screw the belt in place, with the snap lock on the side which best suits the
user and the other part with the buckle on the opposite side.
2. After fitting, check that the belt buckle locks properly in the snap lock.
Fitted belt.
m
WARNING
Permobil positioning belts are designed to position the user only and not to protect you in
the event of a motor vehicle accident. The positioning belts do not replace use of a vehicle
mounted restraint.
(accessory)
Snap lock belt.
40
40
Positioning belt
Fitted belt.