INSTALL BURNER ASSEMBLY
COTTER PIN,
B057805(1)
Slide the Venturi onto the Valve
Raise the end of the Burner Bracket
and slip it over the Phillips Truss Head
Screw. The screw will fit into the hole
on the Burner Bracket.
Note: Ignitor Wires run through center
2
B102227-4-0615
Assembly as shown.
Insert Cotter Pin.
hole with Venturi.
3
1
Insert the Burner Assembly into
the Grill bottom with the Venturi
Tubes facing the front of the Grill.
4
Page 27