COTTER PIN,
B057805(1)
Slide the Venturi on to the Valve
Assembly to the left as shown.
Raise the unsecured end of the Burner
Bracket and slip it over the Phillips
Truss Head Screw. The screw will fit
into the hole on the Burner Bracket.
Insert Cotter Pin.
Note: Ignitor Wires run through center
hole with Venturi.
2
B102221-4-0119
INSTALL BURNER ASSEMBLY
3
1
Insert the Burner Assembly into
the Grill bottom with the Venturi
Tubes facing the front of the Grill.
4
Page 25