INSTALL bURNER ASSEMbLY
COTTER PIN,
b057805(1)
1
Slide the Venturi onto the Valve
Assembly as shown.
Insert the Burner Assembly into
the Grill bottom with the Venturi
Raise end of the Burner Bracket and
Tubes facing the front of the Grill.
slip it over the Phillips Truss Head
Screw. The screw will fit into the hole
on the Burner Bracket.
Insert Cotter Pin.
Note: Ignitor Wires run through center
hole with Venturi.
2
3
4
Page 14
B102268-1-0615