Table of Contents
Advertisement
Manual: It becomes valid after you set the gain setting, shutter, iris setting, wide dynamic
o
region (WDR).
AV: It becomes valid after you set the exposure setting, iris setting, wide dynamic region
o
(WDR).
TV: It becomes valid after you set the shutter setting, exposure compensation, wide dynamic
o
region (WDR).
GAIN SETTING: The value ranges from 1 to 16. Default value is 2. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.
SHUTTER: You can set shutter speed here. The value ranges from 1/3 to 1/10000. Default value is 1/50.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
IRIS SETTING: The value ranges from 1 to 18. Default value is 11. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.
EXPOSURE COM: The value ranges from 1 to 15. Default value is 8. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
SLOW AE: In the strong light environment, you can lower the camera exposure speed to capture the
image and enhance the definition. The value ranges from 1 to 16. The bigger the value, the higher the
exposure speed. Please use the left/right button on the keyboard or in the speed dome terminal menu
to set. Please make sure your camera supports this function.
SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure time to
capture the image and enhance the definition. Please note for the moving object, the image trail
phenomenon may occur. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
BLC: It is an abbreviation for back light compensation. System can compensate the object in the dark
light to achieve a clear video. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
WDR ENBALE: It is an abbreviation for wide dynamic region. Please make sure your camera supports
current function. This function can adjust the video brightness when the contrast between the strong
light and the dark light is too high. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.4.3.3 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the submenu.
DAY/NIGHT: There are four options: auto/time/night/day. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
DAY TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY TIME
item and then click confirm button to go to setup. Please user up/down button to set the value. After
completed setup, please click confirm button to exit and move the cursor to Save button to save current
setup.
DAY/NIGHT
DAY TIME
NIGHT TIME
SAVE
BACK
EXIT
：AUTO
：07H 00M
: 19H 00M
20
Advertisement
Table of Contents
