1. Manuals
  2. Brands
  3. IC Realtime Manuals
  4. IP Camera
  5. ICIP D3000VIR-I
  6. User manual

IC Realtime ICIP D3000VIR-I User Manual

Hd (ir) vandal proof network dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HD (IR) Vandal Proof Network Dome Camera User's Manual
Version 1.6.0

Advertisement

Table of Contents
loading

Related Manuals for IC Realtime ICIP D3000VIR-I

Summary of Contents for IC Realtime ICIP D3000VIR-I

  • Page 1 HD (IR) Vandal Proof Network Dome Camera User’s Manual Version 1.6.0...
  • Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
  • Page 3 Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;...
  • Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.

  • Page 5: Table Of Contents

    Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Specifications ........................ 2 1.3.1 Performance ......................2 Structure ............................5 Dimensions ........................5 Port Description ......................5 Note： ............................5 Bidirectional talk......................8 2.3.1 Device-end to PC-end ..................8 2.3.2 PC-end to the Device-end ..................
  • Page 6 Operation ........................18 Web Operation .......................... 20 Network Connection ....................20 Login and Main Interface ................... 20 FAQ ............................22 Appendix Toxic or Hazardous Materials or Elements ............... 23...

  • Page 7: General Introduction

    1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 and MJPEG video compression technology and G.711a audio compression technology, which maximally guarantee the audio and video quality.

  • Page 8: Specifications

    Support electronic shutter and gain setup.  Support video watermark function to avoid vicious video modification. 1.3 Specifications 1.3.1 Performance Please refer to the following sheet for network camera performance specification. Model ICIP D3000VIR-I Parameter Main TI high performance DSP Processor Embedded LINUX System...
  • Page 9 Video Compression H.264/H.264H/H.264B/MJPEG Standard PAL: Main stream max(2048*1536@25fps), extra stream max(704*576@25fps), third stream (1920*1080@25fps) Video Frame Rate NTSC: Main stream max(2048*1536@30fps), extra stream max(704*480@30fps), third stream (1920*1080@30fps) 16Kbps-32Mbps. It is adjustable Video Bit Rate Support customized setup. Support mirror. Video Flip Support flip function.
  • Page 10 Temperature Working ≤95% Humidify Dimensions(m ¢151x119 Weight 1.25Kg Installation Support various installation modes...

  • Page 11: Structure

    2 Structure 2.1 Dimensions You can refer to the following figures for dimension information. The Unit is mm. See Figure 2-1 and Figure 2-2. Figure 2-1 Dimension 1 Figure 2-2 Dimension 2 2.2 Port Description Note： Figure in this chapter are all for reference only, and please refer to model 1-a and 1-b according to actual product.
  • Page 12 Figure 2-3 Motorized focus camera internal with IR (1-a) Figure 2-4 Motorized focus camera internal with IR (1-b)
  • Page 13 Figure 2-5 Motorized focus camera internal with IR (2) Please refer to the following sheet for external connection port definition information. Port Port Name Connector Function Description AC 24V power POWER Connect to AC 24V power. port DC 12V power POWER Connect to DC 12V power.

  • Page 14: Bidirectional Talk

     network port external connected cable.  Network port Ethernet port Connect to standard Ethernet port.  Support PoE. Please refer to the following sheet for I/O port cable function information. Note: actual product may vary. Port Cable SN Cable Port Name Function Description Name Alarm output port.

  • Page 15: Alarm Setup

    Listening Operation At the PC-end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the device-end. 2.4 Alarm Setup The alarm interface is shown as in Figure 2-6. Please follow the steps listed below for local alarm input and output connection.
  • Page 16 Please refer to the following figure for alarm output information. See Figure 2-8. Port ALARM_COM and Port ALARM_NO composes an on-off button to provide the alarm output. If the type is NO, this button is normal open. The button becomes on when there is an alarm output. If the type is NC, this button is normal off.

  • Page 17: Installation

    3 Installation Important  Before you complete the installation and setup, do not remove the electrostatic attraction film on the transparent enclosure. Otherwise it may result in injury.  After remove electrostatic attraction film, don’t touch dome enclosure in case it may leave stain.
  • Page 18 IR Motorized Zoom Lens Series Figure 3-2 Step 1 Take the installation position map from the accessories bag and then paste it on the installation ceiling or the wall according to the monitor area. Please dig three bottom holes of the plastic expansion bolts according to the map.
  • Page 19 Figure 3-3 Installation 2 Step 4 Adjust the chassis of the device to the proper position and pull the cable to the cable exit of the installation surface. Line up the holes of the chassis to the three expansion bolt holes you dug in Step 1. Take three ST3.0 self-tapping screws and secure them in the three plastic expansion bolts.
  • Page 20 a) For the IR series product, you can skip current step and go the step b) directly. b) Lens pan rotation angle setup. Please refer to Figure 3-5 to unfasten the lock screw A and adjust the pan monitor angle to the proper position. Then fix the lock screw A. The pan angle ranges from 0°...

  • Page 21: Side Cable Exit

    f) For the IR series product, please skip current step and complete the angle setup directly. Important Please note Figure 3-5and Figure 3-6is based on the IR motorized zoom camera. For the IR manual zoom camera and non-IR series product, the lock screw position and the lens angle adjustment are the same.
  • Page 22 to fill in the cable exit and pull through the cable. It supports the cable whose diameter ranges from 4.0~6.0. It is very convenient for you to do the waterproof work when you pull the cable through your own exit. Please refer to the steps listed. Step 1 Take the waterproof airproof plug out, pull the cable (diameter ranges from 4.0 to 6.0) through the waterproof airproof plug.

  • Page 23: Micro Sd Card Installation

    3.3 Micro SD Card Installation Warning! Please unplug the device power cable and then shutdown the device before you install the Micro SD card. Step 1 Please refer to Step 2 in chapter 3.2 installation steps to open the device protection enclosure. Step 2 Please find the “Micro SD”...

  • Page 24: Quick Configuration Tool

    4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”...
  • Page 25 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.

  • Page 26: Web Operation

    5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ...
  • Page 27 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...

  • Page 28: Faq

    6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device. factory default setup. Micro card Do not set the Micro SD card as the storage media to storage the write times schedule record file.

  • Page 29: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component ○ ○ ○ ○ ○ ○ Device Case ○ ○ ○ ○ ○ ○...

Table of Contents