Starting / Stopping The Engine - Stihl FS 100 RX Instruction Manual

English
Balance the brushcutter.
Adjust the carrying ring.
N
Tighten the screw moderately.
N
Let go of the brushcutter and check
N
to see how it is balance – the cutting
tool should just touch the ground in
the normal working position.
Move the carrying ring as required.
N
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
Detaching the unit from the harness
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
22
Starting / Stopping the
Engine
Control handle
Controls
2
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
1
4 STOP-0 – engine off – ignition is
2
switched off
5 F – normal run position – the engine
is running or can start
6 START – ignition is switched on –
the engine can start
Symbol on slide control
7
Starting
N
7
4
N
N
5
3
N
6
1
N
h – stop symbol and arrow. To stop
the engine, push the slide control in
the direction of the arrow on the stop
symbol (h) to STOP-0.
Press down the trigger lockout lever
and squeeze the throttle trigger
and hold them in that position.
Move the slide control to START
and hold it there.
Now release the throttle trigger,
slide control and trigger lockout in
that order. This is the starting
throttle position.
9
8
Set the choke knob (8):
FS 100 RX