Starting / Stopping The Engine - Stihl KM 91 R Instruction Manual

Opening the filler cap
Turn the cap counterclockwise until
N
it can be removed from the tank
opening.
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the filler cap
Position cap.
N
Turn the cap clockwise as far as it
N
will go and tighten it as securely as
possible by hand.
KM 91 R
Starting / Stopping the
Engine
Controls
3
2
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and Stop
positions. Depress the stop switch
(...) to switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
The ignition is switched off and the
engine stopped when the stop switch is
pressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
Starting the Engine
1
Press the manual fuel pump
N
bulb (9) at least five times – even if
the bulb is already filled with fuel.
Press in the choke knob (8) and turn
N
it to the position that suits the engine
temperature:
g if the engine is cold
< for warm start – also use this posi-
tion if the engine has been running
but is still cold.
The choke knob must engage in
position.
English
13