Fitting The Harness; Balancing The Machine - Stihl FS 100 RX Instruction Manual

Closing the threaded filler cap
Position cap.
N
Turn the cap clockwise as far as it
N
will go and tighten it as securely as
possible by hand.
FS 100 RX

Fitting the Harness

The type and style of the harness
depend on the market.
The use of the harness is described in
the chapter on "Approved Combinations
of Cutting Attachment, Deflector, Handle
and Harness".
Shoulder strap
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is level with your
right hip when the machine is
attached.
Balance the brushcutter.
N

Balancing the Machine

Attaching the unit to the harness
The type and style of the harness and
carabiner (spring hook) depend on the
market.
1
2
1
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
Loosen the screw (3).
N
English
2
1
21