Cleaning And Maintenance - lamber L24-ek-plus Instruction Manual

CLEANING AND
MAINTENANCE
PRECAUTION
INSTRUCTIONS
- IMPORTANT : Before carrying out the
cleaning and
disconnect the equipment from the mains
power supply:
- Follow the directions on the maitenance in
this guide;
- Wear protective clothing and gloves when
challenged elements
clearing solution;
- high temperatures can be reached inside
the machine (90°C). After power supply has been
removed, wait until the machine has reached
room temperature, before working on it.
- never leave tools, parts or other loose
material in or on the machine;
- Chek that there are no rusting foreign
bodies, because of the material "stainless
steel" could begin to rust. Rust particles can
come from non- stainless steel
damaged wire baskets.
- Do not wash the machine and the area
surrounding it with fire hydrants, steam jets
of high-pressure cleaners;
- When clearing the floor be careful not
to saturate the base of the machine, in order
to avoid a prolonged stagnation of water;
- To clean the inside of the machine, use
a brush or a soft cloth;
- To clean the machine do not use
abrasive cleaners;
- BEFORE starting machine or cycle, after
any maintenance or repair work, make sure
all protectives are correctly installed;
PREVENTIVE
AND CLEANING
maintenance operations,
are impregned with
dishes or
DAILY MAINTENANCE
- Turn off the machine by pressing the
switch "A" and drain the water from
the tank by removing the overflow;
- Wait until the water is drained and
there is no debris on the bottom of the
tank.
- Proceed to the specific operation of
daily clearing as descrbed on the next
page
(only for L305-CV) Clean the filter of the
-
steam condenser that is placed in the upper
part of the hood;
- If there is an extended downtime is
advisable to prevent the formation of
unpleasant odors and
raised.
- When the machine is to remain idle for a
long time, drain all the water from
boiler (the drain plug
lower side of the boiler)
electropump. Also leave the
open.
NEVER WASH THE EXTERNAL PART
OF THE MACHINE WITH A WATER JET
leave the hood
the
is located on the
and from the
wash tank