TechniSat HDFS Quick Start Manual page 3

2.1 Connection (a)
> After you have made all connections in accordance with the fol-
lowing information, connect the freesat receiver using the en-
closed power cable to a mains socket. Never connect or discon-
nect the antenna input when the freesat receiver is switched on.
2.2 External input (b)
> Connect the satellite cable from the external antenna to the LNB
input on the freesat receiver
2.3 Connection to a TV (c) & (d)
> Connect the freesat receiver HDMI output to the TV HDMI input
using the supplied HDMI cable. Select the HDMI AV channel on
the TV.
Alternatively:
> Use a SCART cable to connect the receiver 'TV SCART' to the
SCART socket on your TV. If your TV is appropriately equipped,
it will automatically switch to AV, and thus to satellite operation,
when the freesat receiver is switched on.
2.4 Connection to a Video cassette recorder (VCR) or DVD Re-
corder (e)
> Connect the VCR or DVD recorder to the 'VCR SCART' on the re-
ceiver. During playback, the VCR or DVD recorder applies a sig-
nal voltage via the SCART to the freesat receiver. This allows the
audio and video to automatically reach the 'VCR SCART' (not via
the HDMI output) and hence the TV, provided this is connected via
SCART. If your equipment does not support this signalling, use the
AV button to switch your freesat receiver to the external VCR input.
Pressing this button again will allow you to revert to normal opera-
tion.