TechniSat HDFS Quick Start Manual page 4

2.5 Connection of audio output to Hi-Fi or surround sound sys-
tem (f)
> Connect either the analogue or digital audio output from the re-
ceiver to the appropriate input on a Hi-Fi or surround sound
system.
3 Power Up
1. Connect the power lead to a mains socket.
2. The unit will now be powered and in standby.
3. Power on by pressing the red standby key on the remote control
or the standby button on the front of the freesat receiver (identi-
fied by a red surround).
4. The power button surround will now illuminate blue to indicate
that it is operational.