VDO Cyclecomputing M2 WR Manual page 15

M2 WR
Settings – clock
Setting the time in 24-hour format
Press theSET button to confirm the selection "24".
The hours now flash on the display.
Press the BIKE button to set the hours.
Press the SET button to confirm the hour setting.
The minutes then flash.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response "Set Ok" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
15