VDO Cyclecomputing M2 WR Manual page 12

M2 WR
Settings – wheel circumference
Press the SET button to confirm your setting.
The final digit on the right now flashes.
Press the BIKE button to set this digit.
Press the SET button to confirm your setting.
Your wheel circumference setting is now complete.
The response "Set Ok" appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
12