Chapter 6: Plumbing
Marine Head With Holding Tank
Your boat comes equipped with a marine head (toilet) and waste holding tank system. Read the manufacturer's oper-
ation and maintenance manual. The holding tank is plumbed to a waste fitting on the deck for dockside pump-out.
• You can determine the content level of the holding tank by looking at the side of the tank.
• Empty the holding tank at every opportunity.
Electric Flush (If Equipped)
1
SEAWATER PICKUP & BALL VALVE
2
MARINE HEAD
3
MARINE HEAD TO HOLDING TANK
4
HOLDING TANK VENT HOSE
The electric flush marine head (if equipped) installed on your boat uses seawater to flush waste from the toilet. The
seawater intake valve (seacock) must be Open for the head to work.
30
2
1
3
4
5
6
5
HOLDING TANK VENT
6
HOLDING TANK
7
WASTE PUMP-OUT DECK FITTING
7