Hydraulic Clutch; Rear Axle - Dodge 2016 Viper Owner's Manual

Hide thumbs Also See for 2016 Viper:
Table of Contents

Advertisement

358 MAINTAINING YOUR VEHICLE
CAUTION!
Using a transmission fluid other than the manufac-
turer's recommended fluid may cause deterioration
in transmission shift quality and/or damage to the
transmission. Refer to "Fluids, Lubricants, And
Genuine Parts" in this section for fluid specifica-
tions.
Change Transmission Fluid
Refer to "Maintenance Schedule" for the proper mainte-
nance intervals. If contaminated with water, change the
fluid immediately. See your authorized dealer for service.

Hydraulic Clutch

Master Cylinder — Clutch Fluid Level Check
The clutch hydraulic system is fed by a segregated
volume of fluid within the brake system master cylinder
reservoir. In the event of leakage or wear, use only the
manufacturer's recommended brake fluid. Refer to "Flu-
ids, Lubricants, And Genuine Parts" in "Maintaining
Your Vehicle" for further information.

Rear Axle

Axle Lubricant Level Check
Check the exterior of the axle for evidence of gear oil
leakage every 12 months or 6,000 miles (10 000 km). This
check should be made with the vehicle level and on the
ground or raised on an axle and wheel type hoist. The
axle lubricant level should be between the bottom of the
filler plug and a point approximately 3/8 inch (9.5 mm)
below the filler plug. If adding axle lubricant, use only
the manufacturer's recommended axle lubricant. Refer to
"Fluids, Lubricants, And Genuine Parts" in "Maintaining
Your Vehicle" for further information.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viper 2016

Table of Contents