Dodge 2016 Viper Owner's Manual page 203

• Save
Pressing the "Save" button will let you save the last run.
Any saved run over 10, will overwrite the last saved run
for Uconnect System storage. The operation of the Save
feature is listed below:
• With a USB jump drive installed, press the "USB"
button to save runs to the jump drive.
• With an SD Card installed, press the "SD Card" to save
runs to the SD Card.
• Press the "Uconnect" button to save the runs to the
Owner web page.
• Press the "Cancel" button to view the last timer
"Ticket."
UNDERSTANDING YOUR INSTRUMENT PANEL 201
The "Tickets" contain the timers listed below:
• 0-60 MPH (0-100 km/h)
Displays the time it takes for the vehicle to go from 0 to
60 mph (0 to 100 km/h).
• ⅛ Mile (200 meter)
Displays the time it takes for the vehicle to go an ⅛ Mile
(200 meters).
• ¼ mile (400 meter)
Displays the time it takes for the vehicle to go an ¼ mile
(400 meters).
• Brake Distance
Displays the distance it takes the vehicle to make a full
stop. Contains current and last data for distance and start
– from speed.
4