Connecting The Jumper Cables
1. Wear eye protection and remove any metal jewelry
such as watchbands or bracelets that might make an
inadvertent electrical contact.
2. When boost is provided by a battery in another
vehicle, park that vehicle within booster cable reach,
but without allowing the vehicles to touch one an-
other.
3. Set the parking brake, place the transmission in NEU-
TRAL, and turn the ignition OFF on both vehicles.
4. Turn off the heater, radio, and all unnecessary electri-
cal loads.
5. Remove the plastic fuse cover to gain access to the
remote jump-start positive (+) post in the engine
compartment. Refer to the following illustration for
remote jump-starting connections.
WHAT TO DO IN EMERGENCIES 325
Remote Jump Start Connections
1 — Remote Positive (+) Post
2 — Remote Negative (-) Post
6