After Starting; Manual Transmission - Dodge 2016 Viper Owner's Manual

Hide thumbs Also See for 2016 Viper:
Table of Contents

Advertisement

WARNING! (Continued)
and damage the converter and vehicle. If the ve-
hicle has a discharged battery, booster cables may
be used to obtain a start from a booster battery or
the battery in another vehicle. This type of start can
be dangerous if done improperly, so follow this
procedure carefully. Refer to "Jump-Starting" in
"What To Do In Emergencies" for further informa-
tion.
If the engine is flooded, it may start to run, but not have
enough power to continue running when the ENGINE
START button is released. If this occurs, continue crank-
ing up to 15 seconds with the accelerator pedal pushed
all the way to the floor. Release the accelerator pedal and
the ENGINE START button once the engine is running
smoothly.
If the engine shows no sign of starting after two 15
second periods of cranking with the accelerator pedal
held to the floor, the "Normal Starting" procedure should
be repeated.

After Starting

The idle speed is controlled automatically and it will
decrease as the engine warms up.

MANUAL TRANSMISSION

NOTE: The parking brake should be engaged and the
shift lever placed into REVERSE before leaving the
vehicle, especially when parked on an incline.
Your vehicle is equipped with a high torque capacity dual
disc clutch. The clutch pedal must be fully pressed to the
floor during each shift. As you release the clutch pedal,
lightly press the accelerator pedal.
STARTING AND OPERATING 241
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viper 2016

Table of Contents