Yamaha X94 Series Service Manual page 71

ab
1
New
ab
3-12
Drive axle, Motor
2. Install the following part:
• Heat-dissipating sheet 1
NOTICE
Precautions
Thermal protection may be compromised
by an ill-fitting heat-dissipating sheet, so
be sure to replace the heat-dissipating
sheet with a new one when the assembly is
disassembled.
TIP
TIP
• Put the heat-dissipating sheet to designated
location of controller.
• The heat-dissipating sheet should not be
stretched more than 10% beyond its original
dimensions.
3. Install the following parts:
• Gear cover
• Driven gear assembly
• One-way outer boss
• Clutch boss assembly
• Plate washer
TIP
When installing the gear cover, align the pro-
jections a of the gear cover with the cut out
parts b of the motor complete.
Drive
Unit