Diagnosis Function (Lcd Type Display Unit); Display Unit's Display When There Is An Error - Yamaha X94 Series Service Manual

Diagnosis function (LCD type display unit)

4
Slow flashing
Diagnosis function (LCD type
display unit)

Display unit's display when there is an error

Detects system malfunctions, changes assist
operation, and displays the errors as well as
performing error code recording.
Error displays are indicated by the display of
"Er" and an error code indicating the type of
error. You can switch between "Er" and the
error code display by pressing the function
select switch "s".
When a malfunction which may reflect a seri-
ous abnormal operation is displayed, the mal-
function is recorded to prevent recurrence of
the condition, and thereafter the power assist
will be immediately blocked after the power is
turned on and the error will be displayed on the
speedometer section in display unit.
How communication errors are displayed
3
All segments of the assist mode indicator 1
and battery capacity indicator 2 will flash at
the same time, and "Er" will be displayed on
1
the speedometer section 3 of display unit.
When the function select switch "s" 4 is
2
pressed, error code "12", "13" or "15" will be
displayed.
TIP
• The error code is not stored.
• See "List of error codes and corresponding
power assist operations" for more details.
• If there is a communication error, the power
cannot be turned off using the "POWER"
switch of the display unit. To turn the power
off, remove the battery.
2-28
– +
ELEC