Features; Benefits; Machine Set-Up - Husqvarna TS 250 X3 Operator's Manual

WARNING
These signs will give
advice for your safety
.
Before leaving our factory every machine is thoroughly
tested.
Follow our instructions strictly and your
machine will give you long service in normal
operating conditions.
1

Features

Sawing of any kind of tile, up to 24" (610mm)..
Use:
Diagonal on 16" x 16" (406 x 406mm) tile.
Tools: Rip Guide comes standard on all tile saws. See
Tile Cutting Accessories on page 19.
(For information or availability of other accessories con-
tact your Husqvarna supplier.)
Blade Capacity: Rim Ø 10" (254mm) - bore 5/8"
(15,9mm).
Profile Wheel: Rim Ø 6" (152mm) - bore 5/8" (15,9mm).
Blade Rotation: Counter-Clockwise (CCW).
Depth of Cut: 3-3/4" (95mm) with 10" (254mm) blade.
1-1/2
Horsepower:
115
Voltage:
60
Hertz:.
14.6
F.L. Amperages:
2760
Blade Shaft RPM:
105 (48)
Weight:.lb. (kg.)
Dimensions - L x W x H: in 34-3/16" x 21-1/8" x 19-3/4"
. . ........ (mm)
Conveyor Cart - L x W: in (mm) 16-1/2" x 16" (419x406)
Pan Holding Capacity: 6.5 gallons (24.7 liters)
Water Pump Output:
Any persons not involved in the work should
leave the area.
I N S T R U C T I O N
INDICATION
INFORMATION
PROHIBITION
1-1/2
115/230
60
17.2/8.6
3880
110 (50)
(861 x 537 x 502)
100 gal/hr. (378 l /hr.) Standard
300 gal/hr. (1135 i/hr.) Optional
The operator must wear
p r o t e c t i v e c l o t h i n g
appropriate to the work he
is doing.
Use only blades marked with a maximum
operating speed greater than the blade shaft
speed.
Before starting up the machine, make sure
you read this entire manual and are familiar
with the operation of this machine.
The working area must be completely clear,
well lit and all safety hazards removed.
2

Benefits

• The new, improved blade guard offers simplified blade
installation and removal - maximum 10" (254mm)
blade capacity. The external water tube assembly (L)
is removable for easy maintenance.
• 1-1/2 HP, High Torque (HT) 115V/60/1 motor on
standard saw.
• The dependable, high volume, submersible coolant
pump features a screened intake.
• The motor and pump power cords are securely
mounted directly into the Motor Housing.
• The removable Drain Plug (C) at the back end of the
pan permits easy coolant draining and quick sludge
clean out. The Water Pan (2) is removable for easy
cleaning.
• The free-rolling Conveyor Cart (4) is aligned for
straight, smooth cuts. The Back stop with ruler allows
fast mounting and adjustment of the Rip Fence (S)
and optional accessories.
• Makes diagonal cuts on 16" x 16" (406 x 406 mm)
tile. Can make 24" (610mm) rip cuts.
• Full-size belt shield and belt protection.
• The adjustable Water Pan (2) allows the operator to
cut tile comfortably with a full view and control of work
with minimum stretching.
3

Machine Set-Up

See Figure 1
Remove all items from the shipping carton and
•
identify:
1. Cutting Head Assembly (3) including Water Tube
Assembly (L)
2. Frame Assembly (1) with Lockbar (G) & Spring-
assisted Plunge Assembly.
3. Water Pan Assembly (2)
4. Conveyor Cart Assembly (4) and Rip Fence
(S)
Water Pump and Accessory Carton: Includes
5..
Water Pump (H), Hose Barb (J), Water Valve
(K), 15/16" Wrench (E), Drain Plug (C), Locking
Knob (F) with 5/16" flatwasher, Bearing Caps (D)
with 5/16" Capscrews & Flatwashers.
6. Literature Assembly Envelope
NOTE: Check the carton and all packing filler for loose
parts and optional accessories (if ordered).