[Display Option] Menu; [Hdmi In]; [On-Screen Display] - Panasonic PT-JW130FWU Operating Instructions Manual

[DISPLAY OPTION] menu

(Only in the projector mode)
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to "Navigating through the menu" (x page 54) for the operation of the menu screen.
f After selecting the item, press asqw to set.

[HDMI IN]

Switch the setting when the external device is connected to the <HDMI IN> terminal of the projector and the
image is not projected correctly.
1) Press as to select [HDMI IN].
2) Press the <ENTER> button.
f The [HDMI IN] screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The HDMI signal level is displayed for 30 bits of input.

[ON-SCREEN DISPLAY]

Set the on-screen display.
Setting [INPUT GUIDE]
Set whether to display the input guide (currently selected input name, signal name, connection method of wireless
LAN, projector name, and network ID) on the projected image when the input is switched.
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [INPUT GUIDE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f When [INPUT GUIDE] is set to [ON], a guide that corresponds to the input guide (currently selected mode, connection method of wireless
LAN, projector name, and network ID) is displayed when the mode is switched to the lighting mode. If [INPUT GUIDE] is set to [OFF], the
guide will not be displayed the same way as the input guide.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press as to select [ON-SCREEN DISPLAY].
86 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select this item when the HDMI terminal output of an external device (such as a blu-ray disc player) is
connected to the <HDMI IN> terminal.
Select this item when the DVI terminal output of an external device (such as a computer) is connected
to the <HDMI IN> terminal via a conversion cable or similar cable.
Select it also when the HDMI terminal output of a computer or other device is connected to the
<HDMI IN> terminal.
Displays the input guide.
Hides the input guide.